2020年10月27日星期二
2020年9月21日星期一
How to install the shield tunnel exit seal?
In the tunnel projects, the diameter will reach 6-7 meters, and some one even 14 meters. So most of us will confused. How to install this big rubber seal?
First, before construction, we have pre-buried steel ring. At the edge of each exit seal has small holes. Each five degree has one. Total one piece has 72 holes.
Second, set up the landing stage of scaffold. The landing stage material is diameter 48mm steel pipes. At the same time, the workers can clean the pre-buried steel ring's bolt holes. Then each holes install one bolt.
Thirldly, put the exit seal on the bolts. The seal's holes on the bolts.
Fouth, install the round ring, this is to protect the seal.
Finally, install the fold type pressing plate. The pressing plate is made of 2mm thickness steel plate. Each ring has 17 sets of pressing plates.
2020年9月7日星期一
Shield Tunnel Machine Working Video
Our Exit Seal for Shield Tunneling Machine's function is seal tightly with the machine and protect it do not come in any solids.
For Entrance and Exit Rubber Seal, welcome to contact with me.
Email: sales@jxsolidscontrol.com
Website:http://www.jxsollidscontrol.com
2020年8月24日星期一
Anthracite Filter Media for Water Treatment
Do you know anthracite coal? It is the most pulverized coal. The anthracite coal has higher fixed carbon, less volatiles. And it is the hardest coal. In the world, there only 10% anthracite coal.
In water treatment, usually tow or three layers' filter media purification, the most using is anthracite filter media. The coal's itself has high pressure, hard and clear.
In industrial water supply, The use of anthracite filter media is determined according to the form of the filter tank. The double layers' filter is generally 300-400mm thickness, and the filtration rate is 10-14m/h. The three layers' filter material is 450mm, and normal rate is 18-20 m/h.
The common using size is 0.6-1.2mm., 0.8-1.8mm, 1-2mm, 1.2-2.4mm, 2-3mm, 3-4mm.
Welcome come and visit us!
Email: alisa@jxsolidscontrol.com
Website: http://www.jxsolidscontrol.com
2020年8月3日星期一
Good Quality Entrance / Exit Seal for Tunnel Boring Machines
As we all know, tunnel boring has one entrance and one exit. When tunneling, there need one rubber seal to protect the tunnel boring machines do not be damaged by drilling solids, drilling water etc.
For better seal protection, the rubber seal's edge has water drop type, and inner has two layers cotton wire and nylone wire.
Also contain Micro TBM seal. The inner size can reach 7400mm. For more than ten years' manufacture experience. We do each seal for each tunnel project's safe and strong. Save cost, confidence and do not have more worries.
We welcome everyone come and visit us. Each client is our friend.
Website: https://www.axsolidcontrol.com
http://www.jxsolidscontrol.com
Email: sales@jxsolidscontrol.com
Skype ID: zhaoliminabc
2020年6月15日星期一
Desilter and Desander Hydrocyclone
If you want to learn about this hydrocyclones, welcome to contact with us!
http://www.jxsolidscontrol.com
https://www.axsolidcontrol.com
Email: sales@jxsolidscontrol.com
2020年6月10日星期三
A 14 meters diameter Shiled Tunneling Machine's Rubber Gasket is in production
Material: NBR Rubber
Colour: Black
Inner support: cotton wire and nylon wire
Edge type: water drop type
Holes: every 5 degree has one hole
Welcome to our company!
website:https://www.axsolidscontrol.com
http://www.jxsolidscontrol.com
email: sales@jxsolidscontrol.com
2020年3月8日星期日
Shield Tunneling Machine Rubber Gasket
The rubber gasket is made of rubber. The type is circle common, and middle has big empty eye. Near the edge, there are holes to fit it one the machine.
Inner material is cotton and hylon wore to use as the shore.
Welcome to contact with us!
Website: https://www.axsolidcontrol.com/tunneling-machine-rubber-gasket-p00112p1.html
Email: sales@jxsolidscontrol.com