Shaftless Screw Conveyor in drilling waste management

Shaftless screw conveyor shell is made of carbon steel, lining board is made of nylon or wear-resistant ultra-high molecular polyethylene, leaf is made of wear-resistant manganese steel, which not only matches the service life of the factory, but also reduces the cost. 

The biggest characteristic of shaftless screw conveyor is good environmental protection.The spiral surface, which is completely enclosed and easy to clean, can ensure the environment sanitation and the material delivered from pollution and leakage.Large torque and low energy consumption. Shaftless screw conveyor is mainly used for conveying sludge, drilling fluid, etc., and the conveying direction of the conveyor is determined by the spiral direction of the screw blade, which can be transported in both directions.The conveyor can be airtight transportation, prevent environmental pollution.

Shaftless screw conveyor is mainly composed of shaftless screw, u-shaped spiral groove, cover plate, liner plate, inlet, outlet, discharge outlet and drive device. Materials are input by inlet and output by outlet after being pushed by shaftless screw.

Shaftless screw conveyor also known as anti - winding conveyor, garbage disposal conveyor.

Shaftless screw conveyor driving device for kitchen waste: it adopts cycloidal needle wheel reducer or shaft mounted gear reducer with hard tooth surface. When designed, the driving device should be located at the outlet end as far as possible, so that the screw is under tension when running. WLS shaft-less spiral conveyor housing: the housing is u-shaped, with upper cover (when needed), made of stainless steel or carbon steel or glass fiber reinforced plastics.There are two kinds of inlet and outlet of shaftless screw conveyor for food and kitchen waste: square and round. 

The specific choice of shaftless spiral conveyor material is determined according to the customer's meaning, but we will also suggest you to choose the material cost performance and so on, shaftless screw conveyor we have a first-class design and production team, at the same time, the regular model of shaftless spiral blades are ready for stock, the deadline is urgent customer first choice!

The shell of shaftless screw conveyor is made of carbon steel, lining board is made of nylon or wear-resisting ultra-high molecular polyethylene, and leaf is made of wear-resisting manganese steel.

The biggest characteristic of shaft - free screw conveyor is good environmental protection.The spiral surface, which is completely enclosed and easy to clean, can ensure the environment sanitation and the material delivered from pollution and leakage.Large torque and low energy consumption.

Shaftless screw conveyor is mainly used for conveying sludge, gate slag, etc. The conveying direction of the conveyor is determined by the spiral direction of the screw blade, which can be transported in both directions.The conveyor can be airtight transportation, prevent environmental pollution.

Filter Press in Drilling waste management

The fit type for oilfield Filter Press is Plate and Frame Filter Press. The discharge of drilling cuttings are nearly dry.

This type of drilling waste management is using one set high speed decanter centrifuge with a filter press.

More detail, welcome to contact with : alisa@jxsolidscontrol.com
Website: https://www.axsolidcontrol.com

Drilling Fluid Solids Control System Details-Original

A whole drilling fluid solid control system contain 5-7 mud tanks, agitators, mud guns, centrifugal pumps, shale shaker, vacuum degasser, desander, desilter, decanter centrifuge, hopper and connection pipes.

The equipment on 1-2 tanks, and others are only mud tanks with agitators. 

Separation detail:

Mud tank type: Square type, shell is corrugated type, thickness is 6mm, bottom has base like boat. the valves are butterfly valves, inlet pipe is 6" and discharge pipe is 8". Each tank has three sand discharged gates. One the surface of mud tank, there are 500mm width passage, guardrail, explore-proof lights for working at night. 

Agitator: Each cabin has one set horizontal mud agitators, impeller type is propeller type. Two layers.

Mud gun: Can clean the mud tank and agitators with 360 degree swivel.

Centrifugal pump: Between tanks, there need centrifugal pump, supply fluid for shale shaker, desilter etc also need centrifugal pump.

Shale shaker: Linear motion shale shaker, two sets usually. The drilling fluid from well head first go into the shale shaker to remove the bigger size. Shale shaker has big treating capacity.

Vacuum degasser: Remove the gas from drilling fluid after the shaker, the vacuum motor is 4KW. 

Desander and desilter: The separation size is smaller, after the shale shaker, the drilling fluid will go to a second and third separation process. The smallest size is 12-47 micron meters.

Decanter centrifuge: Usually choose middle speed decanter centrifuge, in working, middle speed is enough, the size is 5-7 micron meters. And middle speed has low cost and keep work long life.

Hoppers: Venturi hoppers. The hopers with centrifugal pump on one base can combine a Jet Mud Mixer. It is used to add bentonite and other chemicals.

Pipes: Pipes are very very important for solids control system. So when choose the solid control system, we first choose the inner pipe's towards. The fluid inlet, return etc.

For more, welcome to contact with me: 
Email: alisa@jxsolidscontrol.com
Skype: zhaoliminabc
Wechat:+86 133 3339 0968

HDD Sand Recycling System

For easy removing, the HDD sand recycling system combine desander, shale shaker, and pump together.

For more inquiry, welcome come and visit us.

Email: alisa@jxsolidscontrol.com
Website: http://www.jxsolidscontrol.com

Hydrocyclone Group for River Sand Separation

Hydrocyclone group is a equipment, using 2-18 hydrocyclones working together.

Each hydrocyclone has one valves to control flow rate. In the middle there is a pressure gage.

For this is 50 size hydrocyclone, so the cyclone material is polyurethane. The size more than FX100 is inner polyurethane, and outside is steel to protect.

Welcome come and visit us, any interest, contact with me.
Email: alisa@jxsolidscontrol.com

Filter Unit for HDD Mud Recycling

In HDD projects, there is no much space, so the drilling mud recycling system are very small and easy remove. Because when one project finish, other projects can also use this equipment.

The desander type of our filter unit is combined with 2 hydrocyclones, one set linear motion shale shaker, one storage tank and one set centrifugal pump. The centrifugal pump can pump the drilling mud to supply to hydrocyclones and shale shaker. The fine size will be store in bottom tank.

Welcome come and visit us: Website: https://www.axsolidcontrol.com

RN228 Bearings are exported to Mexico

As a spare parts, the bearings are fit for many equipment. And our RN228M Bearings are very popular in Mexico.

Welcome to inquiry JinXin Machinery.
Email: alisa@jxsolidscontrol.com
Skype: zhaoliminabc