6). Drilling pipe lines: Access from drilling platform's drilling water tank and access to each cabin. In the drilling process, it is used for configuring the drilling mud or flush the mud tank.
7). The oil base line: Use the base oil pump to extract the base oil from the base oil tank and transfer it to each cabin. In the drilling process, when using the oil base mud, the oil base line need modulate the oil base drilling mud.
8). Medium pressure drilling gun pipe line: Through the drilling mud, the drilling mud was increased pressure. Then across the fluid gun pipe to transport to medium pressure drilling mud hydraulic gun. The hydraulic gun's function is cleaning the sediment on the mud tank and mixer the drilling fluid. This years, each mud agitators contain bottom impellers, so almost cancel the hydraulic gun.
9). Tank bottom connection pipe line: the function of tank bottom connection pipeline is to connect every two adjacent cabins. There are two connection types. One is straight connection pipes and the other is balanced liquid pipeline.
10). Shearing pump's suction and discharge pipeline: Polymer drilling fluid through shearing pump to shearing hoppers. After configured from shearing hopper to transport to different function solids control tanks. This pipeline is chosen one, in the offshore drilling, usually do not contain this parts.
11). Feeding pipe line: When drilling, the feeding pump pours the drilling fluid in the well to balance the earth formation pressure.
12). Tank bottom discharge pipeline: At the bottom of each cabin, there is a discharge port. This discharge port connected with discharge pipe to collection the waste. In the tank bottom discharge pipe line, there is water cleaning pipes to cleaning the pipe.
The pipeline parts are finished, if you have any suggestion, welcome to contact with me. We manufacture and design solids control system for you!
Email: alisa@jxsolidscontrol.com
Website: www.jxsolidscontrol.com
没有评论:
发表评论