HDD Mud Recycling System

HDD is called horizontal directional drilling. This is a technology do not dig the surface of earth, and lay pipes. This usually used in oil and gas transport pipes.

Features of horizontal directional drilling:

1.1 directional drill crossing construction will not obstruct traffic, destroy green space and vegetation, and will not affect the normal life and work order of shops, hospitals, schools and residents. It solves the interference of traditional excavation construction on residents' life, and damages and adverse effects on traffic, environment and surrounding building foundation.

1.2 modern crossing equipment has high crossing accuracy, easy to adjust laying direction and burial depth, and long pipeline arc laying distance, which can completely meet the design requirements for burial depth, and enable the pipeline to bypass underground obstacles.

1.3 the buried depth of urban pipe network is generally less than three meters. When crossing the river, the buried depth is generally 9-18 meters below the riverbed. Therefore, horizontal directional drilling rig is adopted to cross the river, which has no impact on the surrounding environment and does not damage the landform and environment, so as to meet the requirements of environmental protection.

1.4 when horizontal directional drilling machine is used for crossing construction, there is no overwater or underwater operation, it does not affect navigation of rivers, and it does not damage levees and riverbed structures on both sides of rivers. The construction is not subject to seasonal restrictions, and has the characteristics of short construction period, less personnel, high success rate, safe and reliable construction.

1.5 compared with other construction methods, the speed of entering and exiting the site is fast, and the construction site can be adjusted flexibly. Especially in urban construction, it can fully show its superiority, and the construction area is small, the project cost is low, and the construction speed is fast.

1.6 when a large river passes through, since the pipeline is buried 9-18 meters below the stratum, there is little oxygen and other corrosive substances in the stratum, so it plays the function of natural anticorrosion and heat preservation, which can ensure the operation time of the pipeline is longer.

Spare Parts of Shale Shaker

Do you know each set of shale shaker need which spare parts? Let's know together below.

Firstly, the shale shaker need a steel frame. The steel fram is calculated according to mechanics principles. If you have design drawing, you also can weld one.

Secondly, it need two motors to provide the vibrating force. The motors are choosed good brand Italy Oli and Martins. The vibrating force is more than 7.0 G, and the moroe power of each one is 1.5KW, 1.72 KW and even high G 1.94KW.

Thirdly, There need one electric control box to control the turn on and turn off of the shaker. The electric box is Ex-proof too.

Next, there are four springs. The springs are rubber or steel material. The function is the same.

Last, there is a very important and easy changed, shale shaker screens. Each shaker has 3 pcs of shaker screens or 4 pcs of shaker screens, now the shaker screen is 1165x585mm, for the users can buy the parts from anywhere. It is also have weldge block to fix the shaker screens.

More interest or requirement, welcome to visit our website and contact us!

Website: https://www.axsolidcontrol.com
Email: sales@jxsolidscontrol.com

solids control equipment video

Mongoose Shale Shaker Screens

Tangshan AngXin Technology Co.,Ltd
MONGOOSE high-capacity composite shaker screens are the most rugged, long-lasting and efficient screens available. Smaller, more numerous panels -Unchanged open area -Improved labeling systemBENEFITS -Resistant to fluids that shorten metal-frame-screen life -Consistently manufactured, rugged construction -Increased operational life -Lower screen-replacement costs -Quick and easy to repair -Less downtime -Does not rust or delaminate -Improved QHSE considerationsSCREEN SPECIFICATIONS -Dimensions:(W x L, inches): 23” x 45.875”.
-Website: https://www.axsolidcontrol.com
-Email: alisazhao@foxmail.com

ZJ70 drilling rig's mud recycling system is working at drilling site

ZJ70 drilling rig's mud system

This system includes 7 mud tanks. On the first tank, there is two shale shakers, one mud cleaner, one vacuum degasser. One the drilling site, the mud gas separator and flare ignition system also ordered together.

Today,we arrived at the drilling site and saw each equipment is working very well and win the good praise from workers. They save more times and powers.

Welcome you and your partners come and visite us!

Tangshan AngXin Technology Co.,Ltd
Website: https://www.axsolidcontrol.com

Drilling Pipe / Casing Drilling Pipe API 5CT

Model No. : API 5CT, K55, J55, N80, L80, P110
Technique: hot rolled / welded
Surface treatment: painting, greasing, coating or as client's requirement
Grade: H40/PSL.1,  J55/PSL.1, J55/ PSL.2, J55/PSL.3
Length: R1 (6.10-7.32m)
             R2 (8.53-9.75m)
             R3 (11.58-12.80m)
Thickness: 5.21-16.13mm
Material: carbon steel

Website:https://www.axsolidcontrol.com
Email： alisazhao@foxmail.com

Derrick Shale Shaker Screens

Derrick is a famous brand shale shaker. Its shale shaker has good performance in separation and quality. But the shale shaker screens are quick-wear parts of shale shaker. No matter how good quality of shale shaker, the shaker screens need to change during some times. The drilling cuttings are hard and sharp. So the surface of shaker screens are easy brocken. Made in China Derrick shale shaker screens has low price, long time using life.

Our website: https://www.axsolidcontrol.com
Email:
sales@jxsolidscontrol.com

Filter Press in drilling waste management drilling site

Frame type filter press is the ideal equipment in drilling waste management. When one drilling well finished, the waste drilling fluid now can not be discharged to the ground directly. Because it contains bentonites etc chemical and some size is really very small.

There need at least one tank, it is used adding flocculant to stick small size, then through the Filter Press. The discharge solid are very dry and can be treatment.

Tangshan AngXin Technology focus on drilling fluid waste management. If you have any interest, welcome to contact with us!

Website: https://www.axsolidcontrol.com
Email: sales@jxsolidscontrol.com

Mud agitators

Series Agitator Drilling liquid agitator is used to provide continuous and reliable agitation of drilling liquid in order to retain uniformity of drilling liquid and keep solid particles suspending. It is of compact structure, light weight, transmission balance, low noise, high efficiency and strong capability, because the reducer adopts turbine worm single reduction gear. Shaft length According to the mud tank depth.
Model JNJ-5.5 JNJ-7.5 JNJ-11 JNJ-15. Motor power 5.5 kW 7.5 kW 11 kW 15 kW. Rotate speed of motor 1450/1750rpm 1450/1750rpm 1450/1750rpm 1450/1750rpm Rotate speed of impeller 60/70rpm 60/70rpm 60/70rpm 60/70rpm Impeller diameter 600/530mm 800/700mm 1000/900mm 1000/900mm.

Email: alisa@jxsolidscontrol.com

Polyurethane Screens

About the material polyurethane:

Polyurethane is a new type of polymer composite material and belongs to high-tech products,its nature between plastic and rubber but its performance is much better than the two, is an ideal material to replace them.

Fine Polyurethane Screen Panels 

1. Superior capacity and performance with high open area of 35 to 45 percent

2. Reduced operating and maintenance costs from long life and ease of installation

3. Available with openings as fine as 300 mesh 

4. Practically non-blinding

5. Can be repaired or patched in place

6. Custom mold designs

Hydrocyclone group are working at dressing plant

When one set hydrocyclone can not meet the treating requirement, we consider the hydrocyclone group. It is combined with several same size hydrocyclones, each inlet pipe has one valves to control flow rate.

The hydrocyclone group is commonly be used in heavy size separation. Such as iron tailings separation, zinc separation etc metal separation. it also can be used in fluid separation.

vertical agitator

Vertical agitator is widely used in mining industry. Welcome to visit us:
Website: https://www.axsolidcontrol.comhttps://www.axsolidcontrol.com

Why Linear Motion Shale Shaker Motors Fix 45° ?

Shale shaker is the primary and initial device to be used to remove the solids in the drilling fluid, which would be used as the first stage solids control equipment in the purification system, and work as other devices, such as desander, desilter, mud cleaner, centrifuge that are all located downstream of the solids control system. Basicly the complete circulation system also includes gumbo remover, scapler shaker and dryer shaker. All of these equipment work together without auxiliary devices, such as mud gun, mud agitator, centrifugal pump, mud hopper, gas remover, degasser etc, to remove the drilling solids that bring to the well surface by the drilling fluid.

Different motors' angle has different separation function. The two motors of ahle shaker has an eccentric block. The 45 degree has just make the two motors working on the same pathway. Then the shaker vibrating in a linear pathway.

If you wanna more knowledge of shale shaker, please email us!

sales@jxsolidscontrol.com

Mud gun is designed and manufactured for different drilling mud solids control system

Mud gun is designed and manufactured for different drilling mud solids control system, has three types of low pressure, medium pressure and high pressure. Mainly match to centrifugal pump and mud pump, and also can match to shear pump. It is a special equipment to clean the wall tube and prevent from mud sediment in the mud tank. It is a ideal equipment to prevent mud sediment, with good performance, large cleaning area, cleaning more thoroughly, simpler structure, flexible operation, easy to use.

Mud gun is the professional tool to prevent the mud precipitation

Mud gun is the professional tool to prevent the mud precipitation in drilling mud circulation system. The impetus of mud gun can come from either mud pump or jet mud mixer. With simple structure, flexible operation, easy using, it is the ideal equipment to prevent the mud precipitation in solids control system.

It’s premium quality mud gun is reliable for common use, that is available to standard mud tank and mud pump. It is with a nozzle or multi-nozzles on the top of transfer pipe. Jinxin mud guns are light weight, small footprint and easy transportation. Especially, the nozzle can rotate 360° which can affuse muds into mud tank regularly. Other features include a 360° rotating swivel, and the ability to be customised to any length.
JinXin drilling fluid mud gun is my company independent design and production, make the solid control system perfect combination, the work coordination so that the whole solid control system into a unified whole.

Sand Pump in Solid Control System

Sand pumps are also used to suck up the drilling mud up the desander, desilter or mud cleaner. So the precipitation tank for the previous equipment becomes the sucking tank for the posterior one. But to better protect sand pump, it is necessary to use only one sand pump for one single purpose, and no more additional pipeline and valves should be connected to the pump. While for the last stage of solids control system, a vertical slurry pump would be used to suck up the drilling mud up to the centrifuge.

When the drilling mud flows into the mud tank, the big solids & slime mud would precipitate at the bottom of the first compartment which is without mud agitator. The bottom of the first mud tank would be ellipse or tapered shape to obtain better precipitate function. and clean mud would flow over into the second compartment which normally equipe a mud agitator at the top, preventing drilling mud from precipitating, and then a sand pump which may be equiped at side bottom of the tank, would pump the drilling mud up to vacuum degasser as the second stage of solids control system.

If you have any interest, welcome contact with: alisa@jxsolidscontrol.com

Shaftless Screw Conveyor in drilling waste management

Shaftless screw conveyor shell is made of carbon steel, lining board is made of nylon or wear-resistant ultra-high molecular polyethylene, leaf is made of wear-resistant manganese steel, which not only matches the service life of the factory, but also reduces the cost. 

The biggest characteristic of shaftless screw conveyor is good environmental protection.The spiral surface, which is completely enclosed and easy to clean, can ensure the environment sanitation and the material delivered from pollution and leakage.Large torque and low energy consumption. Shaftless screw conveyor is mainly used for conveying sludge, drilling fluid, etc., and the conveying direction of the conveyor is determined by the spiral direction of the screw blade, which can be transported in both directions.The conveyor can be airtight transportation, prevent environmental pollution.

Shaftless screw conveyor is mainly composed of shaftless screw, u-shaped spiral groove, cover plate, liner plate, inlet, outlet, discharge outlet and drive device. Materials are input by inlet and output by outlet after being pushed by shaftless screw.

Shaftless screw conveyor also known as anti - winding conveyor, garbage disposal conveyor.

Shaftless screw conveyor driving device for kitchen waste: it adopts cycloidal needle wheel reducer or shaft mounted gear reducer with hard tooth surface. When designed, the driving device should be located at the outlet end as far as possible, so that the screw is under tension when running. WLS shaft-less spiral conveyor housing: the housing is u-shaped, with upper cover (when needed), made of stainless steel or carbon steel or glass fiber reinforced plastics.There are two kinds of inlet and outlet of shaftless screw conveyor for food and kitchen waste: square and round. 

The specific choice of shaftless spiral conveyor material is determined according to the customer's meaning, but we will also suggest you to choose the material cost performance and so on, shaftless screw conveyor we have a first-class design and production team, at the same time, the regular model of shaftless spiral blades are ready for stock, the deadline is urgent customer first choice!

The shell of shaftless screw conveyor is made of carbon steel, lining board is made of nylon or wear-resisting ultra-high molecular polyethylene, and leaf is made of wear-resisting manganese steel.

The biggest characteristic of shaft - free screw conveyor is good environmental protection.The spiral surface, which is completely enclosed and easy to clean, can ensure the environment sanitation and the material delivered from pollution and leakage.Large torque and low energy consumption.

Shaftless screw conveyor is mainly used for conveying sludge, gate slag, etc. The conveying direction of the conveyor is determined by the spiral direction of the screw blade, which can be transported in both directions.The conveyor can be airtight transportation, prevent environmental pollution.

Filter Press in Drilling waste management

The fit type for oilfield Filter Press is Plate and Frame Filter Press. The discharge of drilling cuttings are nearly dry.

This type of drilling waste management is using one set high speed decanter centrifuge with a filter press.

More detail, welcome to contact with : alisa@jxsolidscontrol.com
Website: https://www.axsolidcontrol.com

Drilling Fluid Solids Control System Details-Original

A whole drilling fluid solid control system contain 5-7 mud tanks, agitators, mud guns, centrifugal pumps, shale shaker, vacuum degasser, desander, desilter, decanter centrifuge, hopper and connection pipes.

The equipment on 1-2 tanks, and others are only mud tanks with agitators. 

Separation detail:

Mud tank type: Square type, shell is corrugated type, thickness is 6mm, bottom has base like boat. the valves are butterfly valves, inlet pipe is 6" and discharge pipe is 8". Each tank has three sand discharged gates. One the surface of mud tank, there are 500mm width passage, guardrail, explore-proof lights for working at night. 

Agitator: Each cabin has one set horizontal mud agitators, impeller type is propeller type. Two layers.

Mud gun: Can clean the mud tank and agitators with 360 degree swivel.

Centrifugal pump: Between tanks, there need centrifugal pump, supply fluid for shale shaker, desilter etc also need centrifugal pump.

Shale shaker: Linear motion shale shaker, two sets usually. The drilling fluid from well head first go into the shale shaker to remove the bigger size. Shale shaker has big treating capacity.

Vacuum degasser: Remove the gas from drilling fluid after the shaker, the vacuum motor is 4KW. 

Desander and desilter: The separation size is smaller, after the shale shaker, the drilling fluid will go to a second and third separation process. The smallest size is 12-47 micron meters.

Decanter centrifuge: Usually choose middle speed decanter centrifuge, in working, middle speed is enough, the size is 5-7 micron meters. And middle speed has low cost and keep work long life.

Hoppers: Venturi hoppers. The hopers with centrifugal pump on one base can combine a Jet Mud Mixer. It is used to add bentonite and other chemicals.

Pipes: Pipes are very very important for solids control system. So when choose the solid control system, we first choose the inner pipe's towards. The fluid inlet, return etc.

For more, welcome to contact with me: 
Email: alisa@jxsolidscontrol.com
Skype: zhaoliminabc
Wechat:+86 133 3339 0968

HDD Sand Recycling System

For easy removing, the HDD sand recycling system combine desander, shale shaker, and pump together.

For more inquiry, welcome come and visit us.

Email: alisa@jxsolidscontrol.com
Website: http://www.jxsolidscontrol.com

Hydrocyclone Group for River Sand Separation

Hydrocyclone group is a equipment, using 2-18 hydrocyclones working together.

Each hydrocyclone has one valves to control flow rate. In the middle there is a pressure gage.

For this is 50 size hydrocyclone, so the cyclone material is polyurethane. The size more than FX100 is inner polyurethane, and outside is steel to protect.

Welcome come and visit us, any interest, contact with me.
Email: alisa@jxsolidscontrol.com

Filter Unit for HDD Mud Recycling

In HDD projects, there is no much space, so the drilling mud recycling system are very small and easy remove. Because when one project finish, other projects can also use this equipment.

The desander type of our filter unit is combined with 2 hydrocyclones, one set linear motion shale shaker, one storage tank and one set centrifugal pump. The centrifugal pump can pump the drilling mud to supply to hydrocyclones and shale shaker. The fine size will be store in bottom tank.

Welcome come and visit us: Website: https://www.axsolidcontrol.com

RN228 Bearings are exported to Mexico

As a spare parts, the bearings are fit for many equipment. And our RN228M Bearings are very popular in Mexico.

Welcome to inquiry JinXin Machinery.
Email: alisa@jxsolidscontrol.com
Skype: zhaoliminabc

Filter Unit in Drilling Waste Management

Now with the strictly requirement of environment, the drilling site must do well of waste management.

We new Filter Unit is using Filter Press company with mud tanks. Below is the photo show.

Before using it please check all equipment are in good condition, at the same time fill mixed drilling fluids into chemical feeding tank properly. Check all valves are on right position and then run the filter press to drive the press device.

Press plate should compress filter plates tightly and steadily. Turn on the plunger pump to transfer materials into the filter press. Materials will flow into the filtration room via path on filter plate. Under plunger pump pressure the clean fluids will penetrate out of filter cloth on filter plate then pass through access on filter plate.

After passing filter plate access the fluid will come out together through output port. The clean water after pressed will flow into water collection cabin. There is a set of vertical centrifugal pump on the water cabin to transfer the water into collection tank

The mud cake will be left in the filtration room till the cakes filled full of filtration room, then stop the plunger pump. Turn on the secondary pressing pump and maintain the pressure for a while before release press plate. Then pull the filter plates on by one to the direction of press plate to release mud cakes. The released cakes will be transferred out of the device skid by the belt conveyor. Then the whole device will begin a new circulation.

If you need this Filter Unit, welcome to contact with me: alisa@jxsolidscontrol.com