RN228 Bearings are exported to Mexico

As a spare parts, the bearings are fit for many equipment. And our RN228M Bearings are very popular in Mexico.

Welcome to inquiry JinXin Machinery.
Email: alisa@jxsolidscontrol.com
Skype: zhaoliminabc

Filter Unit in Drilling Waste Management

Now with the strictly requirement of environment, the drilling site must do well of waste management.

We new Filter Unit is using Filter Press company with mud tanks. Below is the photo show.

Before using it please check all equipment are in good condition, at the same time fill mixed drilling fluids into chemical feeding tank properly. Check all valves are on right position and then run the filter press to drive the press device.

Press plate should compress filter plates tightly and steadily. Turn on the plunger pump to transfer materials into the filter press. Materials will flow into the filtration room via path on filter plate. Under plunger pump pressure the clean fluids will penetrate out of filter cloth on filter plate then pass through access on filter plate.

After passing filter plate access the fluid will come out together through output port. The clean water after pressed will flow into water collection cabin. There is a set of vertical centrifugal pump on the water cabin to transfer the water into collection tank

The mud cake will be left in the filtration room till the cakes filled full of filtration room, then stop the plunger pump. Turn on the secondary pressing pump and maintain the pressure for a while before release press plate. Then pull the filter plates on by one to the direction of press plate to release mud cakes. The released cakes will be transferred out of the device skid by the belt conveyor. Then the whole device will begin a new circulation.

If you need this Filter Unit, welcome to contact with me: alisa@jxsolidscontrol.com

PMD48-30 Shale Shaker Screens and Rubber Mountings

The PMD 48-30 shale shaker screen is wave type, fit for FLC2000 shale shakers. 
From the outlook, the PMD 48-30 shale shaker screen has flat plate edge and serration type edge. In the middle east areas, the customers are all using the serration type edge. 

The Material of PMD48-30 shale shaker screen is SS304 or SS316, the edge material is galvanized material. Each piece's net weight is about 6.2 kgs, and the size is 1053x697mm. 

Users who using the shale shaker screens, also need rubber mountings. The rubber mounting is a type of spring in shale shaker. The material is vulcanized rubber, inner with nuts. If you need these, please contact with me: alisa@jxsolidscontrol.com

Welcome come and visit us! http://www.jxsolidscontrol.com

In the delivery, the package is wooden box, it's convenient by air. 

Drilling Waste Management Equipment

Now with the higher and higher environment requirement, the drilling waste cuttings can not be discharged on the drilling site. So we designed and manufactured a set of drilling waste management system. There are two solutions. 

One is using the High G Dry Shale shaker to separate the bigger solids, then using a mud storage and add PAM, then using the Filter Press. The solids is pressed like mud cake, and water discharged is almost clear.

Another is using the Vertical cutting dryer with Screw Conveyors. This is the most common using in the drilling waste management.

If you wanna to know more, welcome to contact with me: alisa@jxsolidscontrol.com

Skype: zhaoliminabc

Hebei JinXin Machinery Co.,Ltd

Mud Mixing Hopper in Solids Control System

Mud Mixing Hopper

In order to guarantee the performance of drilling fluid, the bentonite, weighting agent and other materials for drilling fluid should be added. The mixing hopper is designed for adding this.

The mixing hopper has two types, one is jet type and the other is centrifugal type. But the most common using is jet type. So this hopper is also called Jet Mud Mixer.

Structure: The jet mud mixing hopper is composed of feeding hopper, butterfly valves, jet pipe, mixing chamber and liquid guide pipe.

Working principle. The mixed liquid with a certain pressure and flow rate is injected through the nozzle of the jet pipe an enters into the guide pipe through the mixing cabin. Now the hopper is venturi type.

Double hoppers Jet Mud Mixer

Email: alisa@jxsolidscontrol.com

Website: http://www.jxsolidscontrol.com

Centrifugal Pump Application in Solids Control

Centrifugal pump's application

The SB series centrifugal pumps adopt axial suction structure. The flow parts are anti-wear cast iron. In solids control system, the centrifugal pump transfer the drilling fluid, and feeding for Desander, Desilter and Mixing hopper. The main factors are spare parts can easy find and replace, long working life and low cost.

Common using type parameters.
1). Inlet pipe diameter: 200mm
2). Discharge dameter: 150mm
3). Impeller diameter: 315mm
4). Flow rate: 67 l/s
5). Head: 35 m
6). Speed: 1480 rpm
7). Motor power: Ex-prool type, 45 or 55KW
8). Working life: ≥ 2500 hours

The structure of centrifugal pump

Like the upper photo shows, the centrifugal pump's main parts are pump case, pump data base, impeller, shaft, mechanical seal, coupling, motors and data base etc. The centrifugal pump's seal is mechanical seal, thus make sure there is no leak of pumps. The impeller type is half open type, this lower the flow of pump itself.

For more pump 's knowledge, please contact with alisa@jxsolidscontrol.com

Website: http://www.jxsolidscontrol.com

Name: Hebei JinXin Machinery Co., Ltd

Vacuum Degasser in Solids Control

Vacuum Degasser

Vacuum degasser is a special equipment used to treat the drilling fluid. Its very important effect is restoring the drilling fluid's density, stabilizing the viscosity of drilling fluid, reducing the drilling well cost. When the drilling fluid do not contain the gas, the function of vacuum degasser is a bigger power mud agitator.

The type of vacuum degasser is Vertical type.

Hebei JinXin Machinery Co.,Ltd's Vacuum Degasser Parameters

Model	ZCQ240	ZCQ270	ZCQ300	ZCQ360
Vessel diameter	700mm	800mm	900mm	1000mm
Treating capacity	≤240 m3/h	≤270 m3/h	≤300 m3/h	≤360 m3/h
Vacuum pressure	-0.030～-0.045MPa	-0.030～-0.050MPa	-0.030～-0.055MPa	-0.040～-0.065MPa
Ratio	1.68	1.68	1.68	1.72
Efficiency	≥95%	≥95%	≥95%	≥95%
Main motor	15KW	22KW	30KW	37KW
Vacuum pump motor	2.2KW	3KW	4KW	5.5KW
Impeller speed	860RPM	870RPM	876RPM	880RPM
Dimension	1750×860×1500mm	2000×1000×1670mm	2250×1330×1650mm	2400×1500×1850mm
Weight	1100kg	1350kg	1650kg	1800kg

Welcome come and visit us!

Website: www.jxsolidscontrol.com

Email: alisa@jxsolidscontrol.com